NO HAZMAT ENDORSEMENT Required
Each multi tank fuel trailer is comprised of several 110-gallon tanks, each equipped with a shut-off valve at its base, and a manifold with individual shut-off valves located in the front compartment. This design allows for the legal transportation of non-bulk fuel without requiring a Hazmat Endorsement or CDL in most instances, in accordance with
Federal Law 49 CFR 173.150.
*** Multi-Tanks are Designed for Hauling Diesel Fuel Only ***
Available Models
* Pictures may be shown with additional options not standard.
| 9,990 lbs G.V.W.R. |
| 2-7,000 lbs. Dexter Elec. Nev-R-Adjust Brake Axles |
| 4 – 110 Gal. Smooth Plate Tanks |
| 3/16″ Thick Smooth Plate Side Walls, 10 ga. Smooth Plate End Caps, Floor and Top |
| Slipper Spring Suspension |
| 16″ Black Mod 8 Hole Wheels |
| ST235/80R16 14 Ply Radial Tires |
| 8″ Channel Frame & Tongue w/28″ Extension Ready for DEF |
| 2-5/16″ Adj. Demco 2 Bolt (21K) Cast Coupler |
| 1-10K Spring Loaded Bolt-On Jack |
| Round Diamond Plate Tear Drop Fenders |
| Large Front Tongue Tool Cabinet (2 Doors On Each Side) |
| 1″ Fitting Underneath Center of Tank Bottom With Swirl Basket |
| 1″ Manual Valve Underneath Each Tank |
| Heavy Duty At-A-Glance Fuel Gauge On Top Of Each Tank |
| 2 – 2″ Fill Ports On Top Of Tank, 1 on Driver Side With Ventable Cap, 1 on Passenger Side With Plug |
| Manifold with 1″ Manual Valves for Each Tank |
| Rear Toolcage 60″W X 24″D X 12″H Behind Tank |
| Full Insulated Wiring Harness w/7 Way RV Plug-In |
| Flush Mount Led Lights |
| Sherwin-Williams Zinc Epoxy Primer w/Powdura Polyester Top Coat Powder Coating |
| Industrial Charcoal Gray Color |
| 12,000 lbs G.V.W.R. |
| 2-7,000 lbs. Dexter Elec. Nev-R-Adjust Brake Axles |
| 6 – 110 Gal. Smooth Plate Tanks |
| 3/16″ Thick Smooth Plate Side Walls, 10 ga. Smooth Plate End Caps, Floor and Top |
| Slipper Spring Suspension |
| 16″ Black Mod 8 Hole Wheels |
| ST235/80R16 14 Ply Radial Tires |
| 8″ Channel Frame & Tongue w/28″ Extension Ready for DEF |
| 2-5/16″ Adj. Demco 2 Bolt (21K) Cast Coupler |
| 1-10K Spring Loaded Bolt-On Jack |
| Round Diamond Plate Tear Drop Fenders |
| Large Front Tongue Tool Cabinet (2 Doors On Each Side) |
| 1″ Fitting Underneath Center of Tank Bottom With Swirl Basket |
| 1″ Manual Valve Underneath Each Tank |
| Heavy Duty At-A-Glance Fuel Gauge On Top Of Each Tank |
| 2 – 2″ Fill Ports On Top Of Tank, 1 on Driver Side With Ventable Cap, 1 on Passenger Side With Plug |
| Manifold with 1″ Manual Valves for Each Tank |
| Full Insulated Wiring Harness w/7 Way RV Plug-In |
| Flush Mount Led Lights |
| Sherwin-Williams Zinc Epoxy Primer w/Powdura Polyester Top Coat Powder Coating |
| Industrial Charcoal Gray Color |
| 14,000 lbs G.V.W.R. |
| 2-7,000 lbs. Dexter Elec. Nev-R-Adjust Brake Axles |
| 8 – 110 Gal. Smooth Plate Tanks |
| 3/16″ Thick Smooth Plate Side Walls, 10 ga. Smooth Plate End Caps, Floor and Top |
| Slipper Spring Suspension |
| 16″ Black Mod 8 Hole Wheels |
| ST235/80R16 14 Ply Radial Tires |
| 8″ Channel Frame & Tongue w/28″ Extension Ready for DEF |
| 2-5/16″ Adj. Demco 2 Bolt (21K) Cast Coupler |
| 1-10K Spring Loaded Bolt-On Jack |
| Round Diamond Plate Tear Drop Fenders |
| Large Front Tongue Tool Cabinet (2 Doors On Each Side) |
| 1″ Fitting Underneath Center of Tank Bottom With Swirl Basket |
| 1″ Manual Valve Underneath Each Tank |
| Heavy Duty At-A-Glance Fuel Gauge On Top Of Each Tank |
| 2 – 2″ Fill Ports On Top Of Tank, 1 on Driver Side With Ventable Cap, 1 on Passenger Side With Plug |
| Manifold with 1″ Manual Valves for Each Tank |
| Full Insulated Wiring Harness w/7 Way RV Plug-In |
| Flush Mount Led Lights |
| Sherwin-Williams Zinc Epoxy Primer w/Powdura Polyester Top Coat Powder Coating |
| Industrial Charcoal Gray Color |
Image Gallery
* Pictures may be shown with additional options not standard.
Available Options
Tires & Wheels
- ST235/80/R16 14 Ply Radial Tires w/Silver Mod Wheels 📷
- ST235/80/R16 14 Ply Radial Tires w/Aluminum Wheels 📷
Jacks
- 1 – 12K Bigfoot Self Contained Hyd. Jack Kit w/12V Battery 📷
Diesel Pumps
- 25 GPM 12V Elec. GPI Pump W/20′ Hose/Auto Nozzle/#10 Micron Filter 📷
- 45 GPM Kohler Gas Engine W/MP Pump/35′ Hose/High Flow Auto Nozzle/Filter Kit 📷
- 45 GPM Kohler * Elec. Start * Gas Engine W/MP Pump/35′ Hose/High Flow Auto Nozzle/Filter Kit 📷
Diesel Reels
- 35′ 1″ Hose on Spring Retractable Reel 📷
- 50′ 1″ Hose on Spring Retractable Reel 📷
Flow Meters
- Digital In-Line 35 GPM Flow Meter 📷
- Mechanical 30 GPM Flow Meter 📷
- Mechanical 40 GPM Flow Meter 📷
Diesel Exhaust Fluid (DEF)
- 90 Gal. DEF Tank w/Pump/20′ Hose/Auto Nozzle and 2 Way Fill 📷
- 25′ 3/4″ Hose on Spring Retractable Reel 📷
- 50′ 3/4″ Hose on Spring Retractable Reel 📷
- DEF Digital In-Line 24 GPM Flow Meter 📷
Solar & Battery Kit
- Charging Kit w/12V Battery/Plastic Battery Box/5 Amp Trickle Charger 📷
- 7-Watt Solar Panel Charger 📷
- 12-Watt Solar Panel Charger 📷
Tool Boxes & Platform Rail
- Rear Enclosed Cabinet 60″W X 24″D X 34″H 📷
- 2 Drawer Front Tool Chest 16w x 6.5h x 16d (2 – 3″ Drawers) 📷
- 2 Drawer Low Rear Tool Chest 15w x 13h x 20d (1 – 3″ Drawer, 1 – 7″ Drawer) 📷
- 1 – 36″ Wide 4″ High Drawer Rear Work Bench 📷
Compressor/Generators
- Compressor w/Elec. Start Gas Engine/8 Gallon 17.2 CFM Two Stage Compressor with 50′ Air Hose Reel 📷
- Compressor/Generator w/Elec. Start Gas Engine/8 Gallon 17.2 CFM Two Stage Compressor with 50′ Air Hose Reel 📷
- Compressor/Generator w/Elec. Start Gas Engine/8 Gallon 17.2 CFM Two Stage Compressor with 50′ Air Hose Reel with Rear Drawers and Work Bench 📷
Other Options
- Receiver Hitch 📷
- Receiver Hitch w/7 Way Plug 📷
- Interior Lighting for Large Front Enclosed Cabinet📷
- Interior Lighting for Rear Enclosed Cabinet📷
- 5′ High Flood Light Tower 📷
Spare Mount & Tires
- Removable Spare Tire Mount 📷
- ST235/80/R16 14 Ply Radial Spare Tire 📷
- ST235/80/R16 14 Ply Radial Spare Tire w/Aluminum Wheel 📷
Spare Mount & Tires
- Industrial Charcoal Gray 📷
- John Deere Green 📷
- Equipment Yellow 📷
- Kubota Orange 📷
- Black 📷
- Case Red 📷
- Light Gray 📷
- White 📷
- Royal Blue 📷
- Desert Tan 📷
- Army Green 📷
A Leader in Tank Trailer Manufacturing
Multi-Tank Fuel Trailer by Boss Trailers
Introducing the Multi-Tank Fuel Trailer by Boss Trailers – Federal regulations dictate that the maximum amount of fuel that can be legally transported without a HAZMAT endorsement is 119 gallons per non-bulk package. The Multi-Tank Fuel Trailer consists of multiple 110-gallon individual tanks to meet these Federal regulations.
- Widely Available In Dealers Across The US 100%
- 15+ Years of Experience 100%
- Quality and Durability in Every Trailer 100%
Feature Highlights of the Multi-Tank Fuel Trailer
Regulations: No Hazmat required. No CDL required in most cases. No Placarding required.
Durability and Reliability: Built with high-grade materials, this fuel trailer withstands the toughest conditions, offering dependability for years to come.
Safety First: Equipped with safety features that meet industry standards, providing peace of mind in fuel transportation and storage.
Ease of Use: Designed with the user in mind, featuring easy-access tanks, user-friendly pumping equipment, and clear fuel level indicators.
Benefits for Your Business
Operational Efficiency: Keep your fleet fueled and ready, reducing downtime and enhancing productivity with onsite fuel availability.
Cost Savings: Large storage capabilities allow for purchasing fuel at lower prices, offering significant cost savings over time.
Why Boss Trailers?
Choosing Boss Trailers means opting for unmatched quality and innovation. Our commitment to excellence ensures that each fuel trailer we produce meets the highest standards of performance, safety, and reliability.
Enhance Your Fuel Management Today
Elevate your operation’s efficiency with the Multi-Tank Fuel Trailer by Boss Trailers. For more information, pricing details, or to discuss how this fuel trailer can fit into your operations, reach out to us today.